Configuring Polycom Phones with DACX Ameyo

[Admin]

A: Setting up IP Address manually
1. Power up the Phone.
2. Connect network cable to LAN port of Phone.
3. Select Setup.
4. Enter password. (Default is “456”).
5. Select DHCP Client.
6. Select Edit.
7. Select Disabled. Click on OK.
8. Press the down arrow key.
9. Select Phone IP Address.
10. Select Edit. Enter IP Address. For eg. (010.010.001.010). Click on OK.
11. Select Subnet Mask.
12. Select Edit. Enter Subnet Mask. For eg. (255.255.255.000). Click on OK.
13. Select IP Gateway.
14. Select Edit. Enter Gateway IP Address. For eg. (010.010.001.001). Click on OK.
15. Save Config and Reboot the Phone.

B: Setting up SIP Extensions manually

1. After Rebooting, Go back to Menu >Settings >Advanced.
2. Admin Settings
a. Network Configuration (Same menu as above for configuring IP Address).
b. SIP Configuration
i. Server Address: (IP Address of DACX CCS - Asterisk Server).
ii. Server Port: 5060
iii. Register: YES
iv. Line:1 (Line:2, Line:3,....depends on Polycom Phone model. Each Line # corresponds to a SIP account).
1. Display Name: Enter Extension Number, e.g. 101.
2. Address: Enter Extension Number, e.g. 101.
3. Auth User ID: Enter Extension Number, e.g. 101.
4. Auth Password: Enter Password for this Extension, e.g.101.

3. Save Config and Reboot the Phone.

C: Changing the Setting of Digitmap

1. Digit map allows the phone to intelligently detect numbers dialed, without need to press Send button.
2. To disable, Login to Web Interface.
3. Open a web browser, Enter http://<IP address of polycom phone>
4. Login (Default Username: Polycom, Password: 456).
5. Go to SIP > Local Settings.
6. Default Setting: [2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT
7. Delete this to disable Digit map auto dialing.